bizhub PRESS C71cf
| Model | bizhub PRESS C71cf |
| Type | Console |
| Colour Support | Full colour (CMYK) |
| Printing resolution / gradation | 1200dpi (3600dpi equivalent) x 1200dpi / 8bit |
| Max. printing image size | 1195 x 320mm |
| Paper width | 330mm |
| Max. unwinder / rewinder diameter | φ500mm |
| Feeding speed (printing speed) | 18.9m/min., 13.5m/min., 9.45m/min. *Speed depends on the paper type (standard speed: 13.5mm) |
| Compatible file formats | PDF, PS (APPE compatible), 8bitTIFF |
| Printing media | Paper: Non-tack paper, tack paper, Film: Tack film (synthetic paper, PP, PET) |
| Power requirements | Engine: Single phase 200V 22A 50/60Hz Roll feeder/winder: 3-phase, 200V, 4.1KVA 50/60Hz |
| Operating conditions | Temperature: 10 to 30ºc, Humidity: 10 to 80%RH. No condensation. 20%RH gradually decreasing to 10%RH at 10 to 20ºc. [Range of guaranteed image quality] Temperature: 18 to 23ºc, Humidity: 40 to 60%RH |
| Model | JETvarnish 3DS |
| Max sheet size | 364mm x 1020mm |
| Min sheet size | 210mm x 300mm |
| Max printable width | 355mm |
| Media thickness | 135 gsm (150 microns) to 450 gsm (450 microns) |
| Sheets per hour | Up to 4,800 A4 sheets per hour |
| Coatings available | Digital and Offset print compatible. Compatible with most Synthetic, PVC and laminated sheets, Environmental credentials |
| Support | Konica Minolta provided solution with an On-Site maintenance contract to cover support and maintenance |
| Key applications | Business cards, direct mail material, book covers and sleeves, greeting cards, menus, photos and posters, point of sale material, marketing collateral |
| Model | JETvarnish 3D |
| Printing Technology | MGI's inkjet UV Drop-on-Demand (DoD) technology Piezo heads mounted on a solid plate covering the entire sheet width Single pass printing. Flexible & scalable printing architecture |
| Production Speed | Up to 3,000 B2 sheet size per hour (flat spot UV coating). First page out in 16 sec. (no preheating or system latency) |
| Printing Area | 51.5x73.5 cm (standard) 51.5x104.5 cm (extended) |
| Paper Thickness | From 135 to 600 gsm with motorized height-adjustment print heads |
| Coating and Special Inks | New UV coatings specially formulated - with or without 3D raised effects |
| In-Line UV Dryer | "On-the-fly" drying & curing via integrated UV lamps. Spot Coated sheets can be immediately finished or handled, no additional drying time required. |
| Maintenance and Technical Support | Daily maintenance completed in less than 10 minutes. Majority of procedures are automated. Remote troubleshooting & support via included web camera. (high speed internet connection required). |
| Operator Panel | Integrated user-friendly touch-screen LCD. |
| Dimensions (L x W x H) | 7.67 x 2.24 x 2.16 meter (with all doors opened) 1 meter / 3.3? clearance required on all 4 sides |
| Weight | ± 2,150 kg / ± 4,470 lbs |
| Operating Environment | Temperature: 18 to 30?C / 64 to 86?F. Relative humidity: between 30 and 50% (no condensation). |
| Eco Friendly | Eliminates resource waste (wasted electricity, paper and varnish). No plates (offset) or screens (screen printing). No messy cleanup or preparation between jobs. Drastic reduction in amount of consumables and use of bulk packaging. Coating without volatile solvent (no VOC). |
| Production Speed | Up to 1700* B2 sheet size per hour (or 25m/min) * speed will vary according to printing parameter used |
| Formats | Minimum: 21 x 30 cm / 8 x 11.8” Maximum : 52 x 105 cm / 20 x 42” |
| Substrate Thickness | Minimum: 150 gsm and not less than 150 microns/6 mil before printing & eventually lamination Maximum: 600 gsm and not less than 700 microns/24 mil before printing & lamination |
| Substrates | Foil finishing on most matte or glossy laminated surfaces, with ou without aqueous coating, layered paper, plastic, PVC and other coated materials. * confirm substrate/toner/metallic film compatibility with MGI |
| Films | Using most* of the hot foil available on the market. Optimization system of the film consumption. 21x30 cm / 8 x 11.8” * confirm substrate/toner/metallic film compatibility with MGI |
| Rolls | Minimum width of 10 cm. Up to 3 film rolls simultaneously. Roll diameter : max. 30 cm and approximately 2,000 meters of film. 2 cores available : 1 and 3 inches |
| Hot Foil Stamping | On a size 52 x 74 cm, hot foil stamping surface can not exceed 51.5 x 68 cm. |
| Embossing | From 6 up to 200* microns in thickness. The surface of the metallized film may be covered with a layer of varnish or another metallized film (within 2 passes) JETvarnish 3D twin option required |
| Compatibility | Inline module that connects to all JETvarnish 3D. |
| Dry Air | 6 bar / 87 PSI from 150 to 200 litres/hour Air compressor not provided |
| Dimensions & Weight | 2,44 x 1,60 x 1,52 meters (L x W x H) ± 850 kg/ 1,873 lbs |
| Electrical Requirements | 20 kW (32A) at 400 volts - 50/60 Hz - 1 plug CEE/IP44 32A (3P+N+E) |
© - Konica Minolta Business Solution India Pvt Ltd. All rights reserved
